How to Make Your iphone 6 Flashlight Back to Normal
Today, i will share with you some solutions to repair your iphone 6 flashlight. There are reasons for lead to it, so we need to analize it and we can have a more knowledgement about it
Solution 1: Restart iPhone 6
This solution is very easy to do, and it is effective solution. You can fix many iPhone apps or software freezing and stuck issues by restarting.
In order to restart iPhone 6:
- Press and hold the iPhone power button until the slider appears
- Drag the slider to turn the iPhone 6 completely off
- After the iPhone 6 turns off, press and hold the iPhone power button again until you see the Apple logo
Solution 2: Reset all settings on iPhone 6
This solution also easy to do, reset all setting on iPhone just will put iPhone 6 setting to the original status, it will not erase any data on your iPhone 6.
In order to resetting all setting on iPhone 6:
- Go to Settings
- Tap General
- Tap Reset
- Tap Reset all settings
Solution 3: Update IOS
If there are any errors on IOS system, update it to the latest IOS version is the best way. We have 2 ways can update iPhone IOS, update IOS on iPhone 6 or update it by third-party software, such as iTunes.
Update IOS on iPhone 6:
- Go to Settings
- Tap General
- Tap Software update
Update IOS by iTunes:
- Update iTunes to latest version
- Connect iPhone 6 to the computer by iPhone lightning cable
- Open iTunes and select your iPhone 6
- Click Summary, then click Check for Update
- Click Download and Update
- If asked, enter your passcode
Solution 4: Restore iPhone 6
Restore iPhone is last software solution we can do, it will erase all data and settings on iPhone, so we have back up iPhone 6 first.
Restore iPhone 6:
- Connect iPhone 6 to the computer by iPhone lightning cable
- Back up iPhone 6 by iTunes
- After back up, click "Restore" button
Solution 5: Hardware repair iPhone 6
Because all the software solutions can't be fix this iPhone 6 flashlight problem, we need to fix it in hardware aspect.
- Frist replace the iPhone flashlight IC, after replacement, the iPhone 6 flashlight still not working.
- Measuring the U1602 IC, and the problem was found, the layer for U1602 IC solder pad is disconnection.
- Use QUICK 861DW hot air rework station to solder a jumper wire from rear camera socket to U1602 IC solder pad
- Install the U1602 IC to the iPhone motherboard
- Install the iPhone
Finally, test the iPhone 6, now the iPhone flashlight can be turned on, and it works properly. Test the iPhone camera, also works normally.
